Outboard decal Replicas - Find them here!

1997 Evinrude/Johnson 9/10/15 HP E15EEUC

ENGINE COVER - EVINRUDE

ENGINE COVER - EVINRUDE

1) 0284870 ENGINE COVER ASSY. -  9.9 Models, Except 10SEL
1) 0284871 ENGINE COVER ASSY. - 15 Models
1) 0284872 ENGINE COVER ASSY. - 10SEL Models

 

ENGINE COVER - JOHNSON

1) 0438312 ENGINE COVER ASSY. - 15 Models
1) 0438309 ENGINE COVER ASSY.  - 9.9 Models - This part replaces 0438310.
1) 0438310 ENGINE COVER ASSY.  - 10SEL Models

0284870, 0284871, 0284872 - 0438312, 0438309, 0438310
0284870 0284871 0284872 0438312 0438309 0438310
OTHER POSSIBLE PART NUMBERS: 0284795, 0284796, 0284685 - 0435237, 0437218, 0435236,0435238,0437619, 0437182,
0284795 0284796 0284685 - 0435237 0437218 0435236 0435238 0437619 0437182

EVINRUDE DECALS

14) 0212497 LENS, Ev. -port & stbd
15) 0284929 DECAL SET - 9.9 Models, Except 10SEL 10SEL Models
15) 0284930 DECAL SET - 15 Models

  

JOHNSON DECALS

14) 0438433 DECAL SET - 9.9 Models 10SEL Models
14) 0438434 DECAL SET - 15 Models

 

Read more: 1997 Evinrude/Johnson 9/10/15 HP E15EEUC

Evinrude/Johnson 1997 100 HP

Evinrude/Johnson
EVINRUDE 1997 100 E100WTLEUA


ENGINE COVER

0438774 ENGINE COVER ASSY., Johnson
0284740 ENGINE COVER ASSY., Evinrude

0438774, 0284740
0438774 0284740

 

OUTBOARD DECALS

0438778 DECAL SET, Johnson
0284842 DECAL SET, Evinrude

 

PAINT

COLOR NAME OMC
SPRAY CAN		 OMC
CODE		 OMC
SPEC*		 PPG
CODE(1)		 PPG
CODE (2)
PRIMER 500103 - 1655 DP40401 -
BLACK 330446 85BJ1 1748 9696 -
BLUE 211699 92BE1 1796 18319 18320
SMOKE 340416 94SMJ1 1821 35718  -

* IN HOUSE REFERENCE ONLY
(1) ONE COAT FINISH FOR MIDSECTION AND GEARCASE
(2) BASE COAT PLUS CLEARCOAT FOR UPPER AND LOWER ENGINE COVERS


More Articles …

  1. Evinrude/Johnson EVINRUDE 1995 15 E15REOD 1995
  2. Evinrude/Johnson JOHNSON 1997 130 BJ130TLEUB
  3. Evinrude/Johnson 1995-1996 80/88/90/115/ V4
  4. Evinrude/Johnson 1998 5/6/8 HP

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards