Outboard decal Replicas - Find them here!

1993 Johnson 40/50 - Rope Start

J40RLETB 1993

ENGINE COVER - JOHNSON 40 - ELECTRIC START

DIAGRAM 435871-05

1 0435158 ENGINE COVER ASSY.. 40EC - 40EL - 40TL - 40TEC - 40TEL - 40TTL
1 0434556 ENGINE COVER ASSY.. TJ40EL

0435158, 0434556, 0435160, 0435161,
0284137, 0284060, 0284138, 0284186

0435158 0434556 0435160 0435161
0284137 0284060 0284138 0284186

Johnson Decals

23 0435625 DECAL SET. 40EC - 40EL - 40TL 40TEC - 40TEL - 40TTL
23 0435313 DECAL SET. TJ40EL

7 0337665 PLATE, Rear. 40EC - 40EL - 40TL 40TEC - 40TEL - 40TTL
7 0336667 PLATE, Rear. TJ40EL

20 0337653 PLATE, Applique. 40EC - 40EL - 40TL 40TEC - 40TEL - 40TTL
20 0335755 PLATE, Applique. TJ40EL

 

ENGINE COVER - JOHNSON 50 - ELECTRIC START

DIAGRAM 435871-05

1 0435160 ENGINE COVER ASSY.. 50BE - 50BEL - 50TL 50TEL
1 0435161 ENGINE COVER ASSY.. 50JE

0435158, 0434556, 0435160, 0435161,
0284137, 0284060, 0284138, 0284186

0435158 0434556 0435160 0435161
0284137 0284060 0284138 0284186

 

Johnson Decals

23 0435625 DECAL SET. 50BE - 50BEL - 50TL 50TEL
23 0435629 DECAL SET. 50JE

7 0337661 PLATE, Rear. 50BE - 50BEL - 50TL 50TEL
7 0337665 PLATE, Rear. 50JE

20 0337653 PLATE, Applique. 50BE - 50BEL - 50TL 50TEL
20 0337663 PLATE, Applique. 50JE

 

ENGINE COVER - JOHNSON ROPE START ONLY

DIAGRAM 435871-09

1 0435157 ENGINE COVER ASSY.Johnson
1 0284134 ENGINE COVER ASSY.EVINRUDE

0435157, 0284134
0435157 0284134

22 0435624 DECAL SET

top cowl models

1992 Johnson J40EENJ, J40EENJ, J40EENM, J40ELENJ, J40RENM, J40RLENM, J40TEENJ, J40TELENJ, J40TELENM, J40TLENJ, J40TLENM, J40TTLENM, TJ40ELENJ, TJ40ELENM, VJ40EENM, VJ40ELENJ, VJ40ELENM, VJ40TELENJ, VJ40TELENM, VJ40TLENJ, VJ40TLENM

1992 Johnson J50BEENJ, J50BEENM, J50BELENJ, J50BELENM, J50JENJ, J50JENM, J50TELENM, J50TLENJ, J50TLENM, VJ50BEENJ, VJ50BEENM, VJ50BELENJ, VJ50BELENM, VJ50TELENM, VJ50TLENJ, VJ50TLENM

1993 Johnson J40EETB, J40ELETB, J40RETB, J40RLETB, J40TEETB, J40TELETB, J40TLETB, J40TLETF, J40TTLETB, J40TTLETF, VJ40EETB, VJ40ELETB, VJ40TELETB, VJ40TLETB, VJ40TLETF
1993 Johnson J50BEETB, J50JETB, J50TELETB, J50TLETB, J50TLETF, VJ50BEETB, VJ50BELETB, VJ50TLETB, VJ50TLETF

1994 Johnson J40EERE, J40ELERE, J40RERE, J40RLERE, J40TEERE, J40TLERE, J40TLERE, J40TTLERE, J40EEOD, J40ELEOD, J40ELEOD, J40REOD, J40RLEOD, J40TEEOD, J40TELEOD, J40TLEOD, J40TTLEOD
1994 Johnson J50BEERE, J50BELERE, J50TELERE, J50TLERE, J50BEEOD, J50BELEOD, J50JEOD, J50TELEOD, J50TLEOD

1996 Johnson BJ40EEDS, BJ40ELEDS, BJ40TLEDS, HJ40RLEDS, J40ELEDS, J40REDS, J40RLEDS, J40TEEDS, J40TEEDS, J40TLEDS, J40TLEDS, J40TTLEDS, SJ40EEDS, SJ40REDS, SJ40RLEDS
1996 Johnson BJ50BEEDS, BJ50BELEDS, BJ50TLEDS, J50TLEDS


J40EETB, J40ELETB, J40RETB, J40RLETB, J40TEETB, J40TELETB, J40TLETB, J40TLETF, J40TTLETB, J40TTLETF, TJ40ELETB, VJ40EETB, VJ40ELETB, VJ40TELETB, VJ40TLETB, VJ40TLETF

J40EETB J40ELETB J40RETB J40RLETB J40TEETB J40TELETB J40TLETB J40TLETF J40TTLETB J40TTLETF TJ40ELETB VJ40EETB VJ40ELETB VJ40TELETB VJ40TLETB VJ40TLETF

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals