Outboard decal Replicas - Find them here!

2006 Evinrude - EN 200 HP - E200DHXSDS - (90° V6 3,3 L)

2006 Evinrude - EN 200 HP -  E200DHXSDS - (90° V6 3,3 L)

ENGINE COVER

http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\065006505\EPC4028.tif&ilSC=35&ilIV=0&ilBR=0&ilIF=P&ilRE=8

DIAGRAM: EPC4028


1 0285653 ENGINE COVER Assy, "WHITE". Includes all decals, except "HP" Decal


http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\065006505\EPC4027a.tif&ilSC=35&ilIV=0&ilBR=0&ilIF=P&ilRE=8

DIAGRAM EPC4027a

EVINRUDE DECALS

1 0215633 EVINRUDE E-TEC - Port.
2 0215634 EVINRUDE E-TEC - Stbd.
3 0215630 RED STRIPE - Port.
4 0215631 RED STRIPE - Stbd.
5 0215667 EVINRUDE - Front & Rear.  2 Submit
6 0352505 BRP Logo. 2 Submit
7 0215558 EU 2006 - Lower
8 0215722 200 - Front & Rear 2 Submit
9 0351222 SALT WATER EDITION - Lower Port
10 0351237 SALT WATER EDITION - Lower Stbd
NS 0334435 Owner Attn, Air Silencer
NS - 3-Star. EMISSION DECAL

1983 1984 Johnson GT 150/235 hp 2.6 litre

1983 1984 JOHNSON 150 HP 235 HP 2,6 LITRE

 394968-06 Diagram

(1)
ENGINE COVER-JOHNSON

ENGINE COVER-EVINRUDE
0282315 ENGINE COVER ASSY.,150.
0282316 ENGINE COVER ASSY.,2.6 litre

0394405, 0394406, 0282315, 0282316

JOHNSON DECALS

 
 
OTHERS
 
 
(27)
 
 
 
PAINT
 

1983 1984 Johnson hp 2.6 litre GT replica V6 Outboard motors.

J150STLCT J150STLCTE  J150STLCRD
J235STLCTSJ235STLCRC



2001 EVINRUDE 200/225/250

2001 EVINRUDE  200  - E200FPXSIF FFI, elec start, TNT, 25 in shaft 2001

ENGINE COVER Diagram epc1373


http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\5001692\epc1373.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8

0285467 ENGINE COVER ASSY.. (Blue (Except 225FH).)
0285465 ENGINE COVER ASSY.. (White.)
0285435 ENGINE COVER ASSY.. (225FH.) - "RUDE RAM"

0285467, 0285465, 0285435
0285467, 0285465, 0285435

EVINRUDE DECALS

10) 0214899 *DECAL, Front (blue). (Blue (Except 225FH).)
11) 0214897 *DECAL, Wrap (blue). (Blue (Except 225FH).)
12) 0214902 *DECAL, Rear, 250. (Blue (Except 225FH).)

10) 0214915 *DECAL, Front (white). (White.)
11) 0214913 *DECAL, Wrap (white). (White.)
12) 0214918 *DECAL, Rear, 250. (White.)

10) 0215167 *DECAL, Front (blue). (225FH.) - "RUDE RAM"
11) 0215165 *DECAL, Wrap (blue). (225FH.) - "RUDE RAM"
12) 0215168 *DECAL, Rear, FH  - "RUDE RAM"
12) 0215188 *DECAL, Rear, 225FH  - "RUDE RAM"


12) 0214900 *DECAL, Rear, 200FPL, FL - (BLUE MODELS)
12) 0214916 *DECAL, Rear, 200FSL, FPX, FX, FCX, FC

12) 0214901 *DECAL, Rear, 225FPL, FL, FGL, FG - (BLUE MODELS)
12) 0214917 *DECAL, Rear, 225FPX, FX, FPZ, FCX, FC, FCZ
 

PAINT

0771227 Primer. (PPG Code - DP40401. One Coat Finish For Midsection And Gearcase)
0771234 Black - 1. (PPG Code - 9696. One Coat Finish For Midsection And Gearcase)()
0771230 Blue. (PPG Code - 18319. One Coat Finish For Midsection And Gearcase)(PPG Code - 18320. Base Coat Plus Clearcoat For Upper And Lower Engine Covers)
0771226 White. (PPG Code - 90538. One Coat Finish For Midsection And Gearcase)
0771245 Silver (Gearcase). (PPG Code - 34487. One Coat Finish For Midsection And Gearcase)
0772414 Clearcoat

 

More Articles …

  1. 2001 Evinrude 70 hp - E70PL4SIA 4-Stroke
  2. JOHNSON 2000 200/225/250 Elec. Start, TNT, 20 IN. shaft, H.O., HS GC 2000
  3. 1989 Johnson 110 HP - TJ110TLCEM
  4. 2009-2013 Evinrude 150/175 200 - (60° V6, 2.6 L)/135 E-TEC H.0.

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards