Outboard decal Replicas - Find them here!

1992 Johnson/EVINRUDE - 9.9/15 HP

ENGINE COVER - EVINRUDE 434975-04

1 0284120 ENGINE COVER ASSY.. 9.9 Models 
1 0284121 ENGINE COVER ASSY.. 10SEL Models 
1 0284122 ENGINE COVER ASSY.. 15 Models 
1 0284057 ENGINE COVER ASSY.. TE Models

0284120, 0284121, 0284122, 0284057
0284120 0284121 0284122 0284057


8 0211920 PLATE, Frame, front
8 0211353 PLATE, Frame, front
8 0211422 PLATE, Frame, front. TE Models


284324 0284324 DECAL SET. 9.9 Models 15 Models  Not Shown
284328 0284328 DECAL SET. 10SEL Models Not Shown 

9.9HP E10ELENA, E10EENA, E10RELENA, E10SELENA, TE10RELENA, E10RLENA, E10RENA
15HP E15EENM, E15ELENM, E15RENM, E15RELENM, E15RLENM 

 



ENGINE COVER - JOHNSON DIAGRAM 434975-05

1 0435145 ENGINE COVER ASSY.. 9.9 Models
1 0435146 ENGINE COVER ASSY.. 10SEL Models
1 0435147 ENGINE COVER ASSY.. 15 Models
1 0434553 ENGINE COVER ASSY.. TJ Models

0435145, 0435146, 0435147, 0434553
0435145 0435146 0435147 0434553

435612 0435612 DECAL SET. 9.9 Models  Not Shown (J10EENA)
435614 0435614 DECAL SET. 15 Models  Not Shown ( J15EENM)
8 0337596 PLATE, Applique, front. 9.9 Models 15 Models

0434613 0434613 DECAL SET. 10SEL Models Not Shown
8 0337600 PLATE, Frame, front. 10SEL Models

0434737 0434737 DECAL SET. TJ Models Not Shown
8 0335055 PLATE, Applique, front. TJ Models

9.9HP J10RENA, J10RELENA, J10RLENA, J10SELENA, J10ELENA, TJ10RELENA, J10EENA
15HP J15RENM, J15EENM, J15RLENM, J15ELENM, J15RELENM

EVINRUDE 2004 150 E150FPXSRS BLUE/WHITE/FHL

 

ENGINE COVER

1) 0285658 ENGINE COVER Assy | (BLUE - Engine Cover., New P/N for 2004 This part replaces 0285623.
1) 0285657 ENGINE COVER Assy | (WHITE - Engine Cover., New P/N for 2004 This part replaces 0285612.
1) 0285659 ENGINE COVER Assy | FHL Models Only, New P/N for 2004 This part replaces 0285614.

 

 

DECALS BLUE MODELS

1) 0215238 BOMBARDIER - Front/Rear
2) 0215270 EVINRUDE Port/Stbd
3) 0215268 *DECAL, Stripe, Stbd
4) 0215269 *DECAL, Stripe, Port
5) 0215555 DIRECT INJECTION Port/Stbd | New P/N for 2004
6) 0215226 135 HP F/R
7) 0215227 150 HP F/R
8) 0215228 175 HP F/R
9) 0215243 EVINRUDE - Front
10) 0215555 DIRECT INJECTION Port/Stbd | New P/N for 2004

 


DECALS WHITE MODELS

1) 0215287 BOMBARDIER - Front/Rear
2) 0215288 EVINRUDE Port/Stbd
3) 0215291 *DECAL, Stripe, Strb
4) 0215292 *DECAL, Stripe, Port
5) 0215554 DIRECT INJECTION Port/Stbd | New P/N for 2004
6) 0215294 135 HP F/R
7) 0215295 150 HP F/R
8) 0215296 175 HP F/R
9) 0215279 EVINRUDE - Front
10) 0351222 SALTWATER EDITION - Port | New P/N for 2004
11) 0351237 SALTWATER EDITION - Starboard | New P/N for 2004
12) 0216969 EU, RCD II Compliant – Lower | New P/N for 2004 This part replaces 0215558.

1988 Evinrude/Johnson 200 HP 200STL MODELS - E200STLCCM 

1988 Evinrude - 200  E200STLCCM 200STL MODELS

 


ENGINE COVER - EVINRUDE - 200STL Diagram 432241-07
0283305 ENGINE COVER ASSY., 200

0283305 0398911 0398828
0283305, 0398911, 0398828

 

Evinrude Decals

2 0210305 APPLIQUE, Port & stbd.
12 0210499 APPLIQUE, Rear & front Order 2
13 0210312 APPLIQUE, Front
21 0210725 PLATE, Applique, front


0283354 DECAL SET. Not Shown

 

ENGINE COVER - JOHNSON - 200STL

 

ENGINE COVER - JOHNSON - 200STL - DIAGRAM 432241-06
0398911 ENGINE COVER ASSY., Charcoal
0398828 ENGINE COVER ASSY., White

0283305 0398911 0398828
0283305, 0398911, 0398828

 

JOHNSON Decals

10 0330456 APPLIQUE, GT, rear
11 0334645 PLATE, Rear
12 0333049 APPLIQUE, Rear
15 0332749 PLATE, Rear
16 0330413 APPLIQUE, Front & rear
19 0330410 APPLIQUE, Front & rear Order 2
21 0332749 PLATE, Applique front

0397519 DECAL SET, White.
0431928 DECAL SET, Charcoal.

 

 

More Articles …

  1. Evinrude 1983 70/75 HP
  2. 2014 Evinrude AB Models 200 - (G2, 74° V6, 3.4 L) E200LHABA
  3. 1986 Evinrude/Johnson 75 HP
  4. EVINRUDE 1997 50 - E50ESLEUR

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards