Outboard decal Replicas - Find them here!

EVINRUDE 2005 40/50/60 hp E-TEC - Bombardier

2005 EVINRUDE E-TEC - BOMBARDIER - RED STRIPE

E40DELSOR, E40DPLSOR, E40DRLSOR
E50DPLSOR
E60WDRLSOS
E60WDRYSOS

ENGINE COVERS

 

ENGINE COVER DIAGRAM EPC3696

http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\045005316\EPC3696.tif&ilSC=55&ilIV=0&ilBR=0&ilIF=P&ilRE=8

0285603 ENGINE COVER Assy - (DR & W Models)
0285604 ENGINE COVER Assy - (DE, DP Models) 


ENGINE COVER DIAGRAM EPC4272

http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\065006498\EPC4272.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8

0285648 ENGINE COVER Assy - (DR Models)

 

0285603, 0285604, 0285648
0285603 0285604 0285648

 

EVINRUDE DECALS

DIAGRAM EPC3695


http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\055006027\EPC3695.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8


1 0215536 EVINRUDE - Front/Rear. 2
2 0215331 LENS, BOMBARDIER logo. 2
3 0215537 EVINRUDE E-TEC - Port.
4 0215538 EVINRUDE E-TEC - Starboard.
5 0215559 STRIPE, - Port.
6 0215560 STRIPE - Starboard.

7 0215532 "40" HP Front/Rear 2
8 0215533 "50" HP Front/Rear 2


9 0215558 EVINRUDE "EU" 2006
10 0333979 SHIFT, Instruction - (DR & W Models)
11 0334435 OWNER, Attention

12 0215534 "60" HP Front/rear (W Models only) 2

13 0215652 "Commercial", Decal (W Models only)

PAINT

0777172 Primer Spray Can. (PPG Code - DP40401. One Coat Finish For Midsection And Gearcase)
0777179 Black Spray Can. (PPG Code - 9696. - Cylinder/Crankcase paint
0351907 Blue Spray Can. (SAC61243 PPG Code - One coat finish for Midsection And Gearcase), Base coat plus clearcoat for Upper and Lower engine covers.
0777171 White Spray Can. (SAC61243 PPG Code - One coat finish for Midsection And Gearcase), Base coat plus clearcoat for Upper and Lower engine covers.

EVINRUDE 2006-2007 40/50/60/ hp E-TEC - BRP

2006-2007 EVINRUDE E-TEC - BRP - RED STRIPE

2006-2007
40: E40DELSDA, E40DPLSDA, E40DRLSDA, E40DPLSUM, E40DRLSUM
50: E50DPLSDA, E50DPLSUM
60: E60DPLSDA, E60DPLSUM
E40DELSDA E40DPLSDA E40DRLSDA E40DPLSUM E40DRLSUM
E50DPLSDA E50DPLSUM
E60DPLSDA E60DPLSUM
 

ENGINE COVERS

 

 

ENGINE COVER EPC3696


http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\045005316\EPC3696.tif&ilSC=50&ilIV=0&ilBR=0&ilIF=P&ilRE=8

PROFILE DRAWING 065006498-Falcon
http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\065006498\Falcon.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8

0285649 ENGINE COVER Assy - (DE, DP Models)

 

 

 

ENGINE COVER EPC4272

http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\065006498\EPC4272.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8

0285648 ENGINE COVER Assy - (DR Models)

0285649,0285648
0285649 0285648

 

EVINRUDE DECALS

DIAGRAM EPC3695


http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\065006498\EPC3695a.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8

1 0215536 EVINRUDE - Front/Rear 2
2 0352506 BRP Logo 2
3 0215537 EVINRUDE E-TEC - Port
4 0215538 EVINRUDE E-TEC - Starboard
5 0215559 STRIPE, - Port
6 0215560 STRIPE - Starboard

7 0215532 "40" HP Front/Rear 2
8 0215533 "50" HP Front/Rear 2
9 0215534 "60" HP Front/Rear 2

10 0215558 EVINRUDE "EU" 2006
11 0333979 SHIFT, Instruction - (DR Models)
12 0334435 OWNER, Attention
NS 0215774 3 Star

 

PAINT

1 0777172 Primer. PPG Code - DP40401
2 0777179 Black. PPG Code - 9696
3 0777171 White. PPG Code - 90538
4 0772414 Clearcoat. Use with base color on upper and lower engine covers.
5 0777177 Graphite. PPG Code - 35718
6 0777175 D.I. Blue. PPG Code - 18319
7 0351907 E-TEC Blue. PPG Code - SAC61243

 

1991 Johnson 88/90/100/115 Jet TJ

1991 Johnson 90 hp J90TLAIE 

Johnson ENGINE COVER ASSY.

Diagram 434248-05

1 0433887 ENGINE COVER ASSY., 88

 

1 0434558 ENGINE COVER ASSY., 90. TJ90 Models Only

1 0433890 ENGINE COVER ASSY., 90. Metallic Gray

1 0433889 ENGINE COVER ASSY., 90. White

1 0434574 ENGINE COVER ASSY., 90 Jet, (65)

 

1 0434559 ENGINE COVER ASSY., 115. TJ115 Models Only

1 0433892 ENGINE COVER ASSY., 115. Metallic Gray

1 0433891 ENGINE COVER ASSY., 115. White

1 0434573 ENGINE COVER ASSY., 115 Jet, (80)

 

1 0433888 ENGINE COVER ASSY., 100

 

Aplique decals

18 0335263 PLATE, Rear, 88 models

 

21 0335942 PLATE, Frame, front. TJ90 Models Only

21 0335944 PLATE, Frame, front. TJ115 Models Only

 

Johnson Decals

25 0433650 DECAL SET, 88 models

25 0435358 DECAL SET, 90 models

25 0435360 DECAL SET, 90 Jet

25 0435362 DECAL SET, 115 models

25 0435359 DECAL SET, 90, 115. TJ115 Models Only TJ90 Models Only (Tracker Johnson)

25 0435361 DECAL SET, 100 models

 

 This 0435358 DECAL SET, 90 models is used on these models

JOHNSON 1991 J100STLEIE.

JOHNSON 1991 J115JLEIE, J115MLEIE, J115TLAIE, J115TLEIE, J115TXEIE ENGINE COVER - JOHNSON

JOHNSON 1991 J88MSLEIM.

JOHNSON 1991 J90JLEIE, J90TLAIE, J90TLEIE.

JOHNSON 1991 TJ115TLEIE, TJ90TLEIE.

JOHNSON 1991 VJ100SLEIE, VJ115TLAIE, VJ115TLEIE, VJ115TXEIE, VJ90MLEIE, VJ90TLAIE, VJ90TLEIE.

More Articles …

  1. Johnson - 2004 40 hp decals
  2. Johnson 1995 25 hp J25REOR
  3. Johnson 1988 8 hp decals
  4. Evinrude 1988 8 hp decals

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards