Johnson 1995 25 hp (J25REOR) decal set
1 0435151 ENGINE COVER ASSY.. 25RE - 25RLE White
6 0337610 PLATE, Frame, front, 25. 25RE - 25RLE White
18 0337611 PLATE, Frame, rear, 25. 25RE - 25RLE White
19 0435618 DECAL SET. 25RE - 25RLE White
E8RCCS 1988
E8RLCCS 1988
E8SRLCCS 1988
1 0282996 ENGINE COVER ASSY., Ev.. 8SRL Models Only
1 0282995 ENGINE COVER ASSY., Ev.. 8 Models Except SRL
1 0282982 ENGINE COVER ASSY., Ev.. 6SL Models Only
1 0282983 ENGINE COVER ASSY., Ev.. 6 Models Except SL
Evinrude decals
11 0283330 DECAL SET, Ev.. 6 Models Except SL
11 0283343 DECAL SET, Ev.. 6SL Models Only
11 0283331 DECAL SET, Ev.. 8 Models Except SRL
11 0283344 DECAL SET, Ev.. 8SRL Models Only
1 0397424 ENGINE COVER ASSY., Jo.. 8SRL Models Only
1 0397423 ENGINE COVER ASSY., Jo.. 8 Models Except SRL
1 0397410 ENGINE COVER ASSY., Jo.. 6SL Models Only
1 0397411 ENGINE COVER ASSY., Jo.. 6 Models Except SL
Johnson decals
11 0398971 DECAL SET, Jo.. 6 Models Except SL
11 0398890 DECAL SET, Jo.. 6SL Models Only
2008 EVINRUDE E-TEC - BRP - RED STRIPE
40: E40DPLSCB, E40DRLSCB, E40DSLSCS, E40DTLSCS
50: E50DPLSCB, E50DSLSCS, E50DTLSCS
60: E60DPLSCB, E60DSLSCS, E60DTLSCS
65: E65WDRLSCS, E65WDRYSCS
E40DPLSCB E40DRLSCB E40DSLSCS E40DTLSCS
E50DPLSCB E50DSLSCS E50DTLSCS
E60DPLSCB E60DSLSCS E60DTLSCS
E65WDRLSCS E65WDRYSCS
ENGINE COVER EPC3696
0285673 ENGINE COVER Assy, DP models - Blue
0285680 ENGINE COVER Assy, DP models - White
PROFILE DRAWING 065006498-Falcon
http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\065006498\Falcon.tif&ilSC=25&ilIV=0&ilBR=0&ilIF=P&ilRE=8
PROFILE DRAWING 085007515-FalconDT
http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\085007515\FalconDT.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8
ENGINE COVER EPC4272
http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\075007194\EPC4272.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8
PROFILE DRAWING 085007515-FalconWD
http://epc.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\41\\085007515\FalconWD.tif&ilSC=15&ilIV=0&ilBR=0&ilIF=P&ilRE=8
0285678 ENGINE COVER Assy - (DR Models)
0285673, 0285680, 0285678
0285673 0285680 0285678
DIAGRAM EPC4280
Blue Models
1 0215536 EVINRUDE - Blue
3 0215537 EVINRUDE E-TEC - Port -Blue
4 0215538 EVINRUDE E-TEC - Starboard - Blue
7 0215532 "40" HP Front/Rear - Blue 2
8 0215533 "50" HP Front/Rear - Blue 2
9 0215534 "60" HP Front/Rear - Blue 2
10 0215791 "65" HP Front/Rear - Blue 2
White Models
1 0215545 EVINRUDE - White
2 0352506 BRP Logo. 2
3 0215816 EVINRUDE E-TEC - Port -White
4 0215817 EVINRUDE E-TEC - Starboard - White
5 0215559 STRIPE - Port
6 0215560 STRIPE - Starboard
7 0215813 "40" HP Front/Rear - White 2
8 0215814 "50" HP Front/Rear - White 2
9 0215815 "60" HP Front/Rear - White 2
11 0351222 "SALTWATER EDITION" - Port
12 0351237 "SALTWATER EDITION" - Starboard
13 0215558 EVINRUDE "EU" 2006
14 0333979 SHIFT, Instruction - (DR Models)
15 0334435 DECAL, Owner Attention
16 0353680 "COMMERCIAL" 2
NS 0215297 DECAL, Calif - 2 Star.
NS 0215774 DECAL, Calif - 3 Star.
1 0777172 Primer - PPG Code - DP40401
2 0777179 Black (Gloss) - PPG Code - 9696
3 0351066 Black (Military)
4 0777171 White - PPG Code - 90538
5 0772414 Clearcoat. Use with base color on upper and lower engine covers.
6 0351907 E-TEC Blue - PPG Code - SAC61243
IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
NOTE:After completing installation, place these instructions with the product for the owner's future use.
IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.
Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
time for out gassing.
Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.
IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
surface cleaning preparation.
1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
2. Rinse cowl with clean water.
3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
4. Avoid detergents or preparations that contain waxes, oils, or lotions.
1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
isopropyl alcohol and water solution.
5. Ensure the surface has no contamination and is completely dry.
6. Start to apply the decals immediately after solvent cleaning.
1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.
90-8M0143239 eng MARCH 2018 © 2018 Mercury Marine - Page 1 / 16
