Outboard decal Replicas - Find them here!

1970 Evinrude 60HP 60073D

EVINRUDE 1970 60 60073D MOTOR COVER GROUP

1) 0279193 MOTOR COVER ASSEMBLY

9) 0206481 PLATE, Applique port & starboard - 60 hp decal version piece

11) 0206482 PLATE, Applique front - decal version E Evinrude logo

12) 0206484 APPLIQUE & PLATE ASSY.

14) 0206480 PLATE, Applique rear - decal version

19) 0206483 APPLIQUE, Cover, rear 

22) 0206486 APPLIQUE, Cover, starboard - decal version

23) 0206485 APPLIQUE, Cover, port - decal version

279300 0279300 DECAL SET

 

0206481, 0206482, 0206480, 0206486, 0206485, 0279300,

Evinrude/Johnson 1989 1990 3HP J3BRCEC J3BRESR ENGINE COVER

Evinrude/Johnson 1990 3HP J3BRESR ENGINE COVER

1) 0283680 STARTER HOUSING ASSY., Ev. - Evinrude 3BR
6) 0283719 ENGINE COVER, Lower, Ev.

0283725 DECAL SET, Ev. - Evinrude BR models Only

1) 0432755 STARTER HOUSING ASSY., Jo. - Johnson 3BR
6) 0392943 ENGINE COVER, Lower, Jo.

0433037 DECAL SET, Jo.- Johnson BR Models Only

0283680, 0432755, 0283719, 0392943,
0283680 0432755 0283719 0392943

PAINT CHART

E.S. NO.

COLOR

SPRAY CAN

*OMC/PPG COLOR CODE

1655

PRIMER

172757

ZINC CHROMATE

1678

WHITE

173744

81WJ1

1756

SILVER

282342

87SE1

1779

BLUE

211132

89BE1

*PPG REFINISHING COLOR CODE NUMBERS ARE LISTED FOR YOUR CONVENIENCE (FORMERLY DITZLER). PLEASE USE THESE COLOR CODE NUMBERS AT YOUR LOCAL PPG DISTRIBUTION CENTER WHEN LARGER QUANTITIES ARE DESIRED.

 
1989 Evinrude Outboard 3HP E3BRCEC  ENGINE COVER
1990 Evinrude Outboard 3HP E3BRESR ENGINE COVER
1989 Johnson Outboard 3HP J3BRCEC ENGINE COVER
1990 Johnson Outboard 3HP J3BRESR ENGINE COVER

JOHNSON 1989 70 J70ELCEM 1989 ENGINE COVER - JOHNSON

Evinrude/Johnson

JOHNSON 1989 70 J70ELCEM 1989 ENGINE COVER

1) 0433122 ENGINE COVER ASSEMBLY
1) 0432096 ENGINE COVER ASSEMBLY
4) 0331576 APPLIQUE, Engine cover, rear
19) 0335034 APPLIQUE, Front
19) 0331006 APPLIQUE, Front

0433122, 0432096, - 0331576, 0335034, 0331006,

 

Johnson decals

21) 0433126 DECAL SET
13) 0334318 PLATE, Front 

5) 0334318 PLATE, Front (Rear?)

0433126, 0334318, 0334318,


21) 0433206 DECAL SET TJ70 Model Only
13) 0335058 PLATE, Front TJ70 Model Only

0433206, 0335058, 0334318,

0433206, 0335058, 0334318, 0433126,

JOHNSON 2000 150/175 HP J150VXSSS Elec. Start, TNT, 25 IN. shaft, wht, cntr rotate

Evinrude/Johnson JOHNSON 2000 150 J150VXSSS Elec. Start, TNT, 25 IN. shaft, wht, cntr rotate

ENGINE COVER Diagram

1) 5001192 ENGINE COVER ASSY. - Z, W, V | 150PL, 150JPL, 175PL
1) 5001093 ENGINE COVER ASSY. -Y, X, U, T | 150PX, 150SPL,150CX, 175PX, 175SPL, 175CX
1) 5001382 ENGINE COVER ASSY. - S, R | 175V, 150V

5001192, 5001093, 5001382,
5001192 5001093 5001382

Johnson Decals

19) 0346709 *DECAL, Wrap - Z, W, V | 150PL, 150JPL, 175PL
19) 0346488 *DECAL, Wrap - Z, X, U, T, S, R | 175V, 150V, 150CX, 175PX, 175SPL, 175CX, 150PL

20) 0346704 *DECAL, Rear - Z | 150PL
20) 0346487 *DECAL, Rear - Y, X, S | 150PX, 150SPL, 150CX, 150V
20) 0346698 *DECAL, Rear - W | 150JPL
20) 0346697 *DECAL, Rear - W | 150JPL

20) 0346490 *DECAL, Rear - U, T, R | 175PX, 175SPL, 175CX, 175V

21) 0346712 *DECAL, Front - Z | 150PL
21) 0346489 *DECAL, Front - Y, X, S | 150PX, 150SPL, 150CX, 150V
21) 0346699 *DECAL, Front - W | 150JPL

21) 0346713 *DECAL, Front - V | 175PL
21) 0346491 *DECAL, Front - U, T, R | 175PX, 175SPL, 175CX, 175V

22) 0346478 *LENS, Port Side Sea Horse Domed decals
22) 0346479 *LENS, Starboard Side Sea Horse Domed decals

More Articles …

  1. Evinrude/Johnson JOHNSON 1987-1988 2.5 4 HP
  2. 1997 EVINRUDE/JOHNSON 90/115
  3. JOHNSON 2001 60/70 40JET
  4. 2014 EVINRUDE AB Models 175 - (60° V6, 2.6 L) E175DPXABH

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards