Outboard decal Replicas - Find them here!

Outboard Decals

75/90 (4-Stroke) - Cat.# 90-804851004

Mercury Marine [Updated: Oct. 19, 2023] > Outboard > 4 Stroke Carb > 90 HP Carb > [0T801000 THRU 1B226999] - USA - Cat.# 90-804851004
Mercury Marine [Updated: May. 19, 2021] > Outboard > 4 Stroke > 90 HP Carb > [0T801000 THRU 1B226999] - USA - Cat.# 90-804851004
Mercury Marine [Updated: Sep. 28, 2020] > Outboard > 4 Stroke > 90 (4-STROKE) > [0T801000 THRU 1B226999] - USA - Cat.# 90-804851004

TOP COWL 2075

1
827328T 9 TOP COWL ASSEMBLY (BLACK)
827328T10 TOP COWL ASSEMBLY (SILVER)

827328T9, 827328T10
827328T9 827328T10

  

MERCURY DECALS

804855A00 DECAL SET (MERCURY/TRACKER 75)(2004)
804855A05 DECAL SET (MERCURY/TRACKER 75)(2005)

++ 804855A06 DECAL SET (Mercury 75)(2006) 
+++ 8M0065135 DECAL SET, 4 STRO
++++ 8M0114993 DECAL-SERVICE KIT

804857A00 DECAL SET (MERCURY/TRACKER 90)(2004) (Mercury 90)(Long)(2002 and Up)
804857A05 DECAL SET (MERCURY/TRACKER 90)(2005)
++ 804857A06 DECAL SET (MERCURY 90)(2006)
+++ 8M0065135 DECAL SET, 4 STRO
++++ 8M0114993 DECAL-SERVICE KIT

881841A03 DECAL SET (MERCURY 90 SALTWATER)(2004)
881841A05 DECAL SET (MERCURY 90 SALTWATER)(2005)
++ 8M0114764 DECAL-SERVICE KIT

  

MARINER DECALS

804856A03 DECAL SET (MARINER 75)
804858A03 DECAL SET (MARINER 90)

  

OTHER DECALS

827887 DECAL, Unleaded Fuel - Bodensee

804656A00 DECAL, EPA Label Information (2000)
804656A01 DECAL, EPA Label Information (2001)
804656A02 DECAL, EPA Label Information (2002)
804656A03 DECAL, EPA Label Information (2003)

Read more: 75/90 (4-Stroke) - Cat.# 90-804851004

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards