Outboard decal Replicas - Find them here!

4/5/6 4-STROKE - Cat.# 90-803599006

 > Mercury Marine [Updated: Mar. 27, 2023] > Outboard > 4 Stroke > 6 HP Carb > [0R067090 THRU 0R411837] - USA - Cat.# 90-803599006

 

 

 

 

TOP COWLING DIAGRAM 14503

1
803580T1 TOP COWL ASSEMBLY (Black)
803580T4 TOP COWL ASSEMBLY (Black)(Use With Integral Fuel Tank)
803580T2 TOP COWL ASSEMBLY (Silver)
803580T5 TOP COWL ASSEMBLY (Silver)(Use With Integral Fuel Tank)

803580T1, 803580T4, 803580T2, 803580T5,
803580T1 803580T4 803580T2 803580T5

 

MERCURY DECALS

803635A06 DECAL SET Black 4 HP/4 HP Sailpower
803634A06 DECAL SET Black 5 Horsepower 
804769A06 DECAL SET Black 6 Horsepower

 

MARINER DECALS

803638A03 DECAL SET Gray 4 Horsepower (2003 and Above)
888723A03 DECAL SET 4 Sailmate (Gray 4 Sailmate)(2003 and Above)

803637A03 DECAL SET Gray 5 Horsepower (Gray 5 H.P.)(2003 and Above)
803639A03 DECAL SET Gray 6 Horsepower (Gray 6 H.P.)(2003 and Up)

 

OTHER DECALS

5) 8156931 DECAL Fuel Lever Remote Fuel Shut-Off (Use With Integral Fuel Tank)

6
879706 DECAL Fuel Lever (Use With Integral Fuel Tank)
8240877 DECAL, Fuel Lever 

8592669 DECAL Bodensee 1 or 2

827887 DECAL Unleaded Fuel - Bodensee

892904010 DECAL Notice-This Side Up

8834338 DECAL CA Very Low Emission
+ 8592758 DECAL CA Very Low Emission

23 0037 804651A06 DECAL EPA Label Information (2006)
23 0037 804651A07 DECAL EPA Label Information (2007)
23 0037 804651A08 DECAL EPA Label Information (2008)
23 NSS NOT SOLD SEPARATE DECAL, EPA (2009 & Up) Contact Mercury Marine Warranty Administration for Replacement (Service Bulletin 2009-18)

MERCURY MARINER Outboard - 2 Stroke EFI - MERC/MAR 2.5L (EFI)/(EFI-OFFSHORE) - ARCHIVE CAT 81150594

> Mercury Marine [Updated: Nov. 15, 2023] > Outboard > 2 Stroke EFI > 2.5L (EFI)/(EFI-OFFSHORE) > ARCHIVE CAT 81150594

2.5L EFI
2.5L EFI OFFSHORE 

MERC/MAR 2.5L (EFI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0D935271 THRU 0G366999 SERIAL NUMBER

COWLS

1) 4006-817704A24 TOP COWL BLACK (MERCURY)
1) 4006-817704A25 TOP COWL GRAY (MARINER)

2) 817706A3 FRONT COVER BLACK (MERCURY)
2) 817706A4 FRONT COVER GRAY (MARINER)

817704A24,  817704A25, 817706A3, 817706A4,
FIT OTHERS: 817704A22, 817704A23, 817704A31, 8M0084538, 848290A15, 848291, 817704A2,
817704A24 817704A25 817706A3 817706A4

24) 4016-847893A2 SKIRT BLACK SHORT (MERCURY)
24) 4016-847893A4 SKIRT BLACK LONG (MERCURY)
24) 4016-847893A3 SKIRT GRAY SHORT (MARINER)
24) 4016-847893A5 SKIRT GRAY LONG (MARINER)

847893A2, 847893A4, 847893A3, 847893A5,
847893A2 847893A4 847893A3 847893A5

 

MERCURY DECALS

37-817660A91 DECAL SET BLACK
37-818956A1 DECAL SET, FRONT COVER BLACK

37-817660A91, 37-818956A1, 817660A91, 818956A1,
37-817660A91 37-818956A1 817660A91 818956A1

MARINER DECALS

37-818263A91 DECAL SET GRAY
+ 818267A97 DECAL SET - GREY
37-818267A1 DECAL SET, FRONT COVER GRAY

37-818263A91, 37-818267A1, 818263A91, 818267A1,
37-818263A91 37-818267A1 818263A91 818267A1

 

 

 

 

1978-1979 2 Stroke Carb - 115 (6 CYL.) ARCHIVE CAT 79182

 > Mercury Marine [Updated: Mar. 17, 2023] > Outboard > 2 Stroke Carb > 115 (6 CYL.) > ARCHIVE CAT 79182

1978 Outboard 115 [ELPT] - 1115628

MERC 115
SERIAL NUMBER
1150, 115 . . . . . . . . . . . . . USA 4855153 THRU 5314655
1150, 115 . . . . . . . . . . . . . CAN 7112248 THRU 7131212
1150, 115 . . . . . . . . . . . . . AUS 8051950 THRU 8061119

 

TOP COWL AND SUPPORT BRACKETS Diagram 40750

COWLING AND FRONT COVER Diagram 40751

5999 TOP (WITHOUT DECALS)
+ 7934 TOP(WITHOUT DECALS)
5631A4 COWL FRONT COVER ASSEMBLY (WITHOUT DECALS)
+ 7928A3 COWL FRONT COVER ASSEMBLY (WITHOUT DECALS)
4660A 4 WRAP AROUND COWL ASSEMBLY

5999, 7934, 5631A 4, 5631A4, 7928A3, 4660A,
5999 7934 5631A 4 5631A4 7928A3 4660A

MERCURY DECALS

78597A78 DECAL SET - SERIAL GROUP #3
86434A79 DECAL SET - SERIAL GROUP #4


 

Subcategories

  • Mercury-Mariner-Tracker-Force Outboard Decals

    DECAL DRY APPLICATION

    IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or operating the product.
    NOTE:After completing installation, place these instructions with the product for the owner's future use.
    IMPORTANT: This decal set must be applied dry. Do not use a soap and water mixture to apply this decal set.

    Tools, Materials, and Surface Requirements

    Tools and Materials

    • Decal application squeegee (3M® Applicator PA 1 Gold - recommended)
    • Air release tool (3M Air Release Tool 391x) or a straight pin - used to remove trapped air bubbles
    • Clean microfiber towel (Meguiar’s® Supreme Shine Microfiber Towel - recommended)
    • Spray bottles and labels for each cleaning solution
    • Cleaning solution:
      a. Liquid dishwashing soap
      b. Isopropyl alcohol
      IMPORTANT: Identify each spray bottle of cleaning solution with a label.

    Surface Requirements

    Special attention is required when applying decals to certain surfaces, including primed, painted, and certain plastics. All
    painted surfaces must be cured per the manufacturer's requirements. When applying decals to plastic surfaces, allow proper
    time for out gassing.

    Surface Preparation

    Application Temperature

    Apply the decal when the surface and ambient air temperature is between 16-373 °C (61-99 °F).
    NOTE: Applying the decal near the minimum temperature specification, the adhesive bond will develop more slowly than temperature in the mid to upper specification range.

    Step One General Cleaning

    IMPORTANT: Do not shortcut the cleaning process. All of the surfaces are considered contaminated prior to a thorough
    surface cleaning preparation.

    1. Mix a solution of 29.5 cc (1 fl oz) liquid dishwashing detergent with 3.7 Liter (4 US qt) of warm water.
    2. Rinse cowl with clean water.
    3. Dry the cowl with a clean Meguiar‘s Supreme Shine Microfiber Towel.
    4. Avoid detergents or preparations that contain waxes, oils, or lotions.

    Step Two Solvent Cleaning

    1. Mix a solution of isoprooyl alcohol and water to a 1:1 ratio. Store in a spray bottle and identify the solution with a label.
    2. Saturate a clean paper towel with the isopropyl alcohol and water solution.
    3. Wipe the cowl with the saturated towel followed immediately with a lint-free towel before the solution evaporates.
    NOTE: Isopropyl a/coho/ evaporates quickly. You must Wipe the surface immediately after applying the solution.
    4. When the paper towel becomes contaminated with dirt, discard it and use a clean paper towel saturated with the
    isopropyl alcohol and water solution.
    5. Ensure the surface has no contamination and is completely dry.
    6. Start to apply the decals immediately after solvent cleaning.

    Decal Application

    Application Tips

    1. Ensure that the surrounding work area and the surface are properly cleaned to avoid contamination.

    90-8M0143239 eng MARCH 2018       © 2018 Mercury Marine      -     Page 1 / 16

  • Evinrude-Johnson Outboard Decals
  • Nissan-Tohatsu Outboard Decals
  • Yamaha Outboard Decals
  • Suzuki Outboard Decals
  • Honda Outboards